Scientific program

June 1st 2016

Main Entrance 8:30 18:00 Registration    
Auditorium 9:20 9:45 Opening Ceremony    
Auditorium 9:45 10:20 Plenary Lecture
Chairman: Andrea Carpinteri
A review of gradient effect and size effect in high cycle multiaxial fatigue of metals. Prof. Thierry Palin-Luc  
  10:20 10:45   COFFEE BREAK  
Room number Start End Session Title Authors
Room 005 10:50 11:10 Welding
Chairman: Sabrina Vantadori
FATIGUE OF WELD ENDS UNDER COMBINED IN- AND OUT-OF-PHASE MULTIAXIAL LOADING SHAMS, E. - VORMWALD, M.
11:10 11:30 COMPARATIVE STUDY OF MULTIAXIAL FATIGUE METHODS APPLIED TO WELDED JOINTS IN MARINE STRUCTURES VAN LIESHOUT, P.S. - DEN BESTEN, J.H. - KAMINSKI, M.L.
11:30 11:50 FATIGUE LIFE INVESTIGATIONS CONSIDERING WELDING RESIDUAL STRESS AND SHAPE EFFECTS FOR A NON-LOAD CARRYING FILLET JOIN TSUTSUMI, S.T. - MORITA, K. - FINCATO, R.F. - MOMII, H.
11:50 12:10 ON THE USE OF THE MODIFIED WÖHLER CURVE METHOD TO DESIGN FRICTION STIR WELDED TUBULAR JOINTS AGAINST MULTIAXIAL FATIGUE HATTINGH, D.G. - JAMES, M.N. - MAGGIOLINI, E. - SUSMEL, L. - TOVO, R.
12:10 12:40 COFFEE BREAK
12:40 13:00 Notch I
Chairman: Filippo Berto
AN ELASTO-PLASTIC APPR. TO ESTIMATE LIFETIME OF NOTCHED COMPONENT UNDER VARIABLE AMPLITUDE FATIGUE LOADING: A PRELIMINARY INV NAMIQ, Z. - SUSMEL, L.
13:00 13:20 BIAXIAL FATIGUE TESTS OF NOTCHED SPECIMENS FOR AISI 304L STAINLESS STEEL BERETTA, G. - CHAVES, V. - NAVARRO, A.
13:20 13:40 A UNIFIED RULE TO ESTIMATE MULTIAXIAL ELASTOPLASTIC NOTCH STRESSES AND STRAINS UNDER IN-PHASE PROPORTIONAL LOADINGS MEGGIOLARO, M.A. - TUPIASSU PINHO DE CASTRO, J. - NAZARE MARQUES, L.F. - MARTHA, L.F.
14:00 15:30 LUNCH
15:30 15:50 HCF
Chairman: Jaime T P Castro
HIGH CYCLE TORSIONAL FATIGUE PROPERTIES OF 17-4PH STAINLESS STEEL YANASE, K. - SCHÖNBAUER, B. - ENDO, M.
15:50 16:10 ULTRASONIC FATIGUE TESTING DEVICE UNDER BIAXIAL BENDING BRUGGER, C. - PALIN-LUC, T. - OSMOND, P. - BLANC, M.
16:10 16:30 A MULTISCALE DAMAGE MODEL FOR HIGH CYCLE FATIGUE LIFE PREDICTION IN POLYCRYSTALLINE METALLIC MATERIALS MOREL, F. - MAREAU, C. - ZGHAL, J. - GMATI, H.
16:30 16:50 MICROSTRUCTURE-DEPENDENT PREDICTIONS OF THE EFFECT OF DEFECT SIZE AND SHAPE ON THE HIGH-CYCLE FATIGUE STRENGTH GUERCHAIS, R. - MOREL, F. - SAINTIER, N.
16:50 17:20 COFFEE BREAK
17:20 17:40 Fatigue criteria II
Chairman: Manuela Sander
MULTIAXIAL FATIGUE CRITERION BASED ON PARAMETERS FROM TORSION AND AXIAL S-N CURVE. MARGETIN, M. - DURKA, R. - CHMELKO, V.
17:40 18:00 FRACTURE TOUGHNESS ESTIMATION OF SM490A NOTCH CT SPECIMEN BY MULTIAXIAL FRACTURE STRAIN MODEL YOUN, G. - NAM, H. - RYU, H. - KIM, Y. - KAMAYA, M.Y.
18:00 18:20 COMPARISON BETWEEN SSF AND CRITICAL-PLANE MODELS TO PREDICT FATIGUE LIVES UNDER MULTIAXIAL PROPORTIONAL HISTORIES FREITAS, M. - REIS, L. - MEGGIOLARO, M.A. - CASTRO, J.T.P.
18:20 18:40 PREDICTING RESIDUAL STRESSES INFLUENCE ON CRACK INITIATION FOR LOW-CYCLE FATIGUE BRUNO, B. - DOUDARD, C. - THEVENET, D. - BRIDIER, F. - CALLOCH, S.
Room 006 10:50 11:10 Random&Variable I
Chairman: Carlos Navarro
ESTIMATION OF FATIGUE LIFE FOR SELECTED METALLIC MATERIALS UNDER MULTIAXIAL VARIABLE FATIGUE LOADING WANG, Y. - SUSMEL, L.
11:10 11:30 A STUDY OF DAMAGE ACCUMULATION FOR THIN WELDED JOINTS PIERRON, Q. - MAITOURNAM, H. - MERHY, E.
11:30 11:50 FATIGUE CRACK GROWTH BEHAVIOR UNDER MULTIAXIAL VARIABLE AMPLITUDE LOADING GATES, N. - FATEMI, A. - IYER, N. - PHAN, N.
11:50 12:10 INCORPORATION OF MEAN/MAXIMUM STRESS EFFECTS IN THE MULTIAXIAL RACETRACK FILTER MEGGIOLARO, M.A. - CASTRO, J.T.P. - WU, H.
12:10 12:40 COFFEE BREAK
12:40 13:00 Contact I
Chairman: David Nowell
HEAT SOURCES ESTIMATION UNDER FRETTING LOADING BASED ON INFRARED IMAGE PROCESSING: APPLICATION TO CRACK NUCLEATION CONDITIONS MOUSTAFA, A. - BERTHEL, B. - FOUVRY, S. - CHARKALUK, E.
13:00 13:20 ROLLING CONTACT FATIGUE CRACK GROWTH IN RAILS_XFEM 3D MULTI-SCALE MODELLING TAKING INTO ACCOUNT THE RAIL BENDING MAI, S.H. - NGUYEN-TAJAN, M.-L. - GRAVOUIL, A.
13:20 13:40 ANALYSIS OF INITIAL CRACK PATH IN FRETTING FATIGUE VÁZQUEZ, J. - ASTORGA, S. - NAVARRO, C. - DOMÍNGUEZ, J.
13:40 14:00 ANALYSIS OF FATIGUE BEHAVIOUR OF STAINLESS STEELS UNDER HYDROGEN INFLUENCE ANGELOVA, D. - YORDANOVA, R. - YANKOVA, S.
14:00 15:30 LUNCH
15:30 15:50 High temperature
Chairman: Takamoto Itoh
BIAXIAL AND TRIAXIAL CREEP DAMAGE EVALUATION FOR TYPE 304 STAINLESS STEEL KOBAYASHI, H. - OHKI, R. - ITOH, T. - SAKANE, M.
15:50 16:10 MULTIAXIAL CREEP-FATIGUE DAMAGE ANALYSIS OF POWER PLANT COMPONENTS UNDER TRANSIENT THERMAL LOADING NAUMENKO, K. - KOSTENKO, Y.
16:10 16:30 FATIGUE CRACK ORIENTATION UNDER MULTI-AXIAL STRESS STATES FROM THERMAL FLUCTUATIONS AND RESIDUAL STRESSES TAHERI, S. - FATEMI, A.
16:30 16:50 FATIGUE AND FRACTURE OF A BRAZED W/CU JOINT HEAT SINK UNDER CYCLIC HIGH-HEAT-FLUX LOADS YOU, J.H. - LI, M.
16:50 17:20 COFFEE BREAK
17:20 17:40 Application I
Chairman: Carmen Madrigal
MULTIAXIAL FATIGUE OF IN-SERVICE ALUMINIUM LONGERINS FRO HELICOPTER ROTOR-BLADES SHANYAVSKIY, A. - TOUSHENTSOV, L.
17:40 18:00 IMPLEMENTATION OF FATIGUE MODEL FOR UNIDIRECTIONAL LAMINATE BASED ON FINITE ELEMENT ANALYSIS: THEORY AND PRACTICE CARRELLA-PAYAN, D. - MAGNEVILLE, B. - HACK, M. - NAITO, T. - URUSHIYAMA, Y. - YAMAZAKI, W. - YOKOZEKI, T. - VAN PAEPEGEM, W.
18:00 18:20 THE NON-PROPORTIONALITY OF LOCAL STRESS PATHS IN ENGINEERING APPLICATIONS RIESS, C. - OBERMAYR, M. - VORMWALD, M.
18:20 18:40 PRESSURE VESSELS DESIGN METHODS USING THE CODES, FRACTURE MECHANICS AND MULTIAXIAL FATIGUE MAJID, F. - JILALI, N. - MOHAMED, E.
Room 008 10:50 11:10 Nonproportional I
Chairman: Alfredo Navarro
INVESTIGATION ON PARAMETRIC REPRESENTATION OF PROPORTIONAL AND NONPROPOTIONAL MULTIAXIAL FATIGUE RESPONSES ALBINMOUSA, J.
11:10 11:30 ATOMISTIC MODELING OF DIFFERENT LOADING PATHS IN SINGLE CRYSTAL COOPER AND ALUMINUM PEZER, R. - TRAPIĆ, I.
11:30 11:50 FATIGUE STRENGTH OF SS400 STEEL UNDER NON-PROPORTIONAL LOADING MORISHITA, T. - TAKAOKA, T. - ITOH, T.
11:50 12:10 FATIGUE LIFE ASSESSMENT OF THIN-WALLED WELDS UNDER NON-PROPORTIONAL LOADINGS BY THE SHEAR STRESS RATE INTEGRAL APPROACH BOLCHOUN, A. - SONSINO, C.M. - KAUFMANN, H. - MELZ, T.
12:10 12:40 COFFEE BREAK
12:40 13:00 Fatigue criteria I
Chairman: Franck Morel
A FATIGUE CRITERION TO DESCRIBE THE COMBINED EFFECTS OF BIAXIAL TENSION AND MEAN STRESS GAUR, V. - DOQUET, V. - ROGUET, E. - PERSENT, E.
13:00 13:20 THE EFFECT OF MEAN SHEAR STRESS ON TORSIONAL FATIGUE STRENGTH OF 34CRNIMO6 STEEL PALLARÉS-SANTASMARTAS, L. - MERZEAU, J. - AVILÉS, R. - GIROT, F. - ALBIZURI, J. - SAINTIER, N.
13:20 13:40 DEVELOPMENT OF MULTIAXIAL FATIGUE DAMAGE PARAMETER AND LIFE PREDICTION METHODOLOGY FOR NON-PROPORTIONAL LOADING SUMAN, S. - KALLMEYER, A. - SMITH, J.
13:40 14:00 PLASTIC FLOW EQUATIONS FOR THE LOCAL STRAIN APPROACH IN THE MULTIAXIAL CASE NAVARRO, A. - MADRIGAL, C. - VALLELLANO, C.
14:00 15:30 LUNCH
15:30 15:50 Experiments I
Chairman: Jesús Toribio
3D-MIXED-MODE-LOADING: MATERIAL CHARACTERISTIC VALUES AND CRITERIA'S VALIDITY RICHARD, H. A. - EBERLEIN, A.
15:50 16:10 DEVELOPMENT OF A TEST RIG FOR ROUND BARS UNDER OUT-OF-PHASE BENDING AND TORSIONAL LOADING KOESTER, P. - SANDER, M.
16:10 16:30 IDENTIFICATION OF FORMING LIMITS AT FRACTURE USING AN IN-PLANE BIAXIAL TENSILE TEST WITH A DEDICATED CRUCIFORM SPECIMEN SONG, X. - LEOTOING, L. - GUINES, D. - RAGNEAU, E.
16:50 17:20 COFFEE BREAK
17:20 17:40 Life estimation
Chairman: Morris Sonsino
A PROBABILISTIC APPROACH FOR MULTIAXIAL FATIGUE CRITERIA MUÑIZ CALVENTE, M. - BLASÓN, S. - DE JESÚS, A.M.P. - CORREIA, J.A.F. - FERNÁNDEZ CANTELI, A.
17:40 18:00 MODELING OF CRACK GROWTH UNDER MIXED MODE LOADING BOLJANOVIC, S. - MAKSIMOVIC, S.
18:00 18:20 DEFINITION OF CRITICAL DEFECT SIZE ON CAST AL COMPONENT UNDER MULTIAXIAL FATIGUE LOADING NADOT, Y. - ROTELLA, A. - AUGUSTIN, R. - PIELLARD, M. - L’HERITIER, S. - ROY, A.
Social program 20:30 21:30 Visit to Reales Alcázares
22.00 23:30 Welcome cocktail

 

June 2nd 2016

Main Entrance 9:00 18:00 Registration
Auditorium 9:30 10:05 Plenary Lecture
Chairman: Ali Fatemi
Multiaxial Deformation and Fatigue of Magnesium Alloys. Prof. Yanyao Jiang
Room number Start End Session Title Authors
Room 005 10:20 10:40 Application II
Chairman: Manuel Freitas
FATIGUE BEHAVIOR AND LIFE PREDICTIONS OF CARBURIZED AUTOMOTIVE GEAR STEELS UNDER MULTIAXIAL STRESS STATES JO, B. - FATEMI, A. - SIM, Y. - SHARIFIMEHR, S.
10:40 11:00 A PLASTIC STRESS INTENSITY FACTOR APPROACH TO TURBINE DISK STRUCTURAL INTEGRITY ASSESSMENT SHLYANNIKOV, V. - ZAKHAROV, A. - YARULLIN, R.
11:00 11:20 MULTI PURPOSE A METAL FATIGUE SENSOR IGNATOVICH, S.R. - KARUSKEVICH, M.V. - MENOU, A. - MASLAK, T.P. - MARUSCHAK, P.O. - PANIN, S.V. - BERTO, F.
11:20 11:40 ENGINEERING APPROACH FOR VEHICLE STRUCTURE SERVICE LIFE ASSESSMENT UNDER COMBINED LOADING VACLAVIK, J. - CHVOJAN, J. - KEPKA, M. - KEPKA JR., M.
11:40 12:10 COFFEE BREAK
12:10 12:30 Random&Variable II
Chairman: Luca Susmel
MULTIAXIAL FATIGUE OF CAST ALUMINUM EN AC-42000 T6 (G-ALSI7MG0.3 T6) FOR AUTOMOTIVE SAFETY COMPONENTS SONSINO, C.M. - FRANZ, R.
12:30 12:50 RANDOM NON-PROPORTIONAL FATIGUE TESTS WITH PLANAR TRI-AXIAL FATIGUE TESTING MACHINE INOUE, T. - NAGAO, R. - TAKEDA, T.
12:50 13:10 MODAL MODEL BASED VIBRATION-FATIGUE ANALYSIS MRŠNIK, M. - SLAVIČ, J. - BOLTEŽAR, M.
13:10 13:30 ON THE ASSESSMENT OF MULTIAXIAL FATIGUE DAMAGE ACCUMULATION UNDER VARIABLE AMPLITUDE LOADING ANES, V. - REIS, L. - FREITAS, M.
13:30 15:00 LUNCH
15:00 15:20 Crack I
Chairman: Masahiro Endo
CRACK INITIATION DIRECTION UNDER SEVERE STRESS GRADIENT AND NON-PROPORTIONAL MULTIAXIAL LOADING: THE FRETTING CASE ARAÚJO, J.A. - CARDOSO, R.A. - FERREIRA, J.L.A. - CASTRO, F.C. - DA SILVA, C.R.M.
15:20 15:40 ESTIMATION OF FATIGUE STRENGTH UNDER MULTIAXIAL CYCLIC LOADING BY VARYING THE CRITICAL PLANE ORIENTATION KUREK, M. - ŁAGODA, T. - VANTADORI, S. - CARPINTERI, A.
15:40 16:00 CRACK FRONT SEGMENTATION UNDER COMBINED MODE I- AND MODE III-LOADING EBERLEIN, A. - RICHARD, H. A.
16:20 16:50 COFFEE BREAK
16:50 17:10 Crack II
Chairman: Luis Tavara
FAILURE OF FIBER REINFORCED COMPOSITES UNDER MULTIAXIAL STRESSES ON MICROSCALE MAROTZKE, C. - FELDMANN, T.
17:10 17:30 PREDICTION OF THE CRITICAL STRESS TO CRACK INITIATION ASSOCIATED TO THE INVESTIGATION OF FATIGUE SMALL CRACK DRISS, M. - BENSEDDIQ, N. - AZARI, Z. - NIANGA, J.M. - MESMACQUE, G.
Room 006 10:20 10:40 Numerical I
Chairman: Nicolas Oscar Larrosa
NUMERICAL SIMULATION OF EARLY-AGE SHRINKAGE EFFECTS ON RC MEMBER DEFLECTIONS AND CRACKING DEVELOPMENT BERNARDI, P. - CERIONI, R. - MICHELINI, E. - SIRICO, A.
10:40 11:00 COUPLED FRACTURE MODES UNDER ANTI-PLANE LOADING POOK, L. - BERTO, FB. - CAMPAGNOLO, A.
11:00 11:20 SIMULATION OF CONTACT ON CRACK LIPS AND ITS INFLUENCE ON FATIGUE LIFE PREDICTION PIERARD, O. - JIN, Y. - WYART, E. - DOMPIERRE, B. - BÉCHET, E.
11:40 12:10 COFFEE BREAK
12:10 12:30 Nonproportional II
Chairman: Alexander Araujo
GROWTH OF LONG FATIGUE CRACKS UNDER NON-PROPORTIONAL LOADINGS – EXPERIMENT AND SIMULATION HOS, Y. - VORMWALD, M.
12:30 12:50 STUDY OF WHITE ETCHING CRACK FORMATION BY CYCLIC COMPRESSION-TORSION EXPERIMENTS AVERBECK, S. - KERSCHER, E.
12:50 13:10 CREEP-FATIGUE LIFE EVALUATION OF HIGH CHROMIUM FERRITIC STEEL UNDER NON-PROPORTIONAL LOADING MORISHITA, T. - MURAKAMI, Y. - ITOH, T. - TANIGAWA, H.
13:10 13:30 APPLICATION OF THE MOMENT OF INERTIA METHOD TO THE CRITICAL-PLANE APPROACH MEGGIOLARO, M.A. - CASTRO, J.T.P. - WU, H.
13:30 15:00 LUNCH
15:00 15:20 Contact II
Chairman: Jesús Vázquez
AN ALL-IN-ONE NUMERICAL METHODOLOGY FOR FRETTING WEAR AND FATIGUE LIFE ASSESMENT LLAVORI, I. - URCHEGUI, M.A. - TATO, W. - GOMEZ, X.
15:20 15:40 FATIGUE LIFE PREDICTIONS FOR THE WHEEL-RAIL CONTACT AREA IN LARGE OFFSHORE TURRET BEARINGS LASSEN, T. - MIKULSKI, Z.
15:40 16:00 A STUDY ON DETERMINATION AND PREDICTION OF FRETTING FATIGUE STRENGTH BY USING A PURE STRESS-BASED CRITERION. HAUSCHILD, S. - HOFMANN, S. - LEIDICH, E.
16:00 16:20 INVESTIGATION OF CONTACT INFLUENCE ON FRETTING FATIGUE CRACKING FROM NON COLLINEAR FRETTING FATIGUE EXPERIMENTS GANDIOLLE, C. - MAUREL, V. - FOUVRY, S.
16:20 16:50 COFFEE BREAK
16:50 17:10 Experiments III
Chairman: Luis Reis
SYSTEMATIC VALIDATION OF EXPERIMENTAL DATA USABLE FOR VERIFYING THE MULTIAXIAL FATIGUE PREDICTION METHODS PAPUGA, J. - PARMA, S. - RŮŽIČKA, M.
17:10 17:30 MULTIAXIAL ELASTOPLASTIC CYCLIC LOADING OF AUSTENITIC 316L STEEL MAZÁNOVÁ, V. - POLÁK, J. - ŠKORÍK, V. - KRUML, T.
17:30 17:50 INTRINSIC BEHAVIOUR OF MODES II, III AND MIXED MODE II+III FATIGUE CRACKS IN METALLIC MATERIALS. VOJTEK, T. - POKLUDA, J. - HOHENWARTER, A. - PIPPAN, R.
17:50 18:10 EXPERIMENTAL AND ANALYTICAL STUDY OF CRACKS UNDER BIAXIAL FATIGUE MOKHTARISHIRAZBAD, M. - LOPEZ-CRESPO, P. - MORENO, B. - LOPEZ-MORENO, A. - CAMAS, D. - ZANGANEH, M.
Room 008 10:20 10:40 Notch II
Chairman: Victor Chaves
POINTED NOTCHES MADE OF TI-6AL-4V UNDER MULTIAXIAL LOADING: FATIGUE ASSESSMENT BASE ON LOCAL SED BERTO, F. - CAMPAGNOLO, A. - WELO, T.
10:40 11:00 A COMPARISON OF METHODS FOR CALCULATING NOTCH TIP STRAINS AND STRESSES UNDER MULTIAXIAL LOADING LUTOVINOV, M. - ČERNÝ, J. - PAPUGA, JP.
11:00 11:20 CHARACTERISTICS OF THE PROCESS ZONE AT SHARP NOTCH ROOTS SUBJECT TO IN-PLANE AND ANTI-PLANE LOADING RAMESH, R. - HILLS, D.A.
11:20 11:40 AVERAGED STRAIN ENERGY DENSITY-BASED SYNTHESIS OF CRACK INITIATION LIFE IN NOTCHED STEEL BARS UNDER TORSIONAL FATIGUE BERTO, F. - CAMPAGNOLO, A. - MENEGHETTI, G. - TANAKA, K.
11:40 12:10 COFFEE BREAK
12:10 12:30 Experiments II
Chairman: Siegfried Fourvy
MULTIAXIAL FRACTURE IN PEARLITIC STEELS UNDER HYDROGEN EMBRITTLEMENT ENVIRONMENTAL CONDITIONS TORIBIO, J. - VERGARA, D. - LORENZO, M.
12:30 12:50 BIAXIAL BEHAVIOR TESTS ON INCO718DA CROSS-SHAPED SAMPLES CONTROLLED BY DIGITAL IMAGE CORRELATION PRISACARI, V.I. - PONCELET, M. - DESMORAT, R. - LONGUET, A. - SEROR, A.
12:50 13:10 BIAXIAL TESTING AND MODELLING OF FATIGUE IN NICKEL SUPERALLOYS NOWELL, D. - PAYNTER, R. - SAHADI, J. - Pattison, S.J. - Foxb, N.
13:10 13:30 DEVELOPMENT OF A VERY HIGH CYCLE FATIGUE (VHCF) MULTIAXIAL TESTING DEVICE VIEIRA, M. - FREITAS, J.M. - RIBEIRO, A. - REIS, L. - FONTE, M.
13:30 15:00 LUNCH
15:00 15:20 Materials I
Chairman: Yves Nadot
TWO-PARAMETER FRACTURE MODEL FOR CORTICAL BONE VANTADORI, S. - CARPINTERI, A. - BERTO, FB. - FORTESE, G. - RONCHEI, C. - SCORZA, D.
15:20 15:40 TENSILE AND FATIGUE BEHAVIOUR OF AS-FORGED AZ31B EXTRUSION GRYGUC, A. - JAHED, H.
15:40 16:00 MULTIAXIAL FATIGUE ASSESSMENT OF CRANKSHAFTS BY LOCAL STRESS APPROACHES LEITNER, M. - TUNCALI, Z. - CHEN, W. - STEINER, R. - GRÜN, F.
16:00 16:20 FATIGUE LIFETIME ESTIMATION CONCEPT FOR SHORT FIBER REINFORCED THERMOPLASTICS WILMES, A. - VORMWALD, M. - HORNBERGER, K.
16:20 16:50 COFFEE BREAK
16:50 17:10 Materials II
Chairman: Masao Sakane
FATIGUE MODELLING FOR GAS NITRIDING WEIL, H. - JÉGOU, S. - BARRALLIER, L. - COURLEUX, A. - BECK, G.
17:10 17:30 THE EFFECT OF PLY FOLDS AS MANUFACTURING DEFECT ON THE FATIGUE LIFE OF CFRP MATERIALS HÖRRMANN, S. - ADUMITROAIE, A. - SCHAGERL, M.
17:30 17:50 THEORICAL STUDY ON MECHANICAL PROPERTIES OF AZ31B MAGNESIUM ALLOY SHEETS UNDER MULTIAXIAL LOADING CONDITIONS ZNAIDI, A. - DAGHFAS, O. - GUELLOUZ, S. - NASRI, R.
Room 005 18:10 18:40 Scientific Committee Meeting  
Social program 20:30 Banquet Los Seises Hotel

 

June 3rd 2016

Main Entrance 9:00 13:00 Registration    
Auditorium 9:30 10:05 Plenary Lecture
Chairman: Jaime Domínguez
Multiaxial fatigue and total life approaches: a perspective based on two decades of research. Prof. Andrea Spagnoli
Room number Start End Session Title Authors
Room 005 10:20 10:40 Materials III
Chairman: Pablo López-Crespo
COMPUTATIONAL SIMULATION OF BIAXIAL FATIGUE BEHAVIOUR OF LOTUS-TYPE POROUS MATERIAL KRAMBERGER, J. - ŠORI, M. - ŠRAML, M. - GLODEŽ, S.
10:40 11:00 HYDROGEN EMBRITTLEMENT PROPERTIES OF S45C CARBON STEEL UNDER MULTIAXIAL LOADING YAMAMOTO, T. - MITSUNE, M. - TAKEMURA, T. - DOI, M. - TSUTSUMI, N. - ITOH, T.
11:00 11:20 FIBRE-MATRIX DEBONDS IN UNIDIRECTIONAL FIBRE-REINFORCED COMPOSITES UNDER BIAXIAL TRANSVERSE LOADS TAVARA, L. - MANTIC, V. - REINOSO, J. - ESTEFANI, A. - PARIS, F.
11:40 12:10 COFFEE BREAK
12:10 12:30 Numerical II
Chairman: Michael Vormwald
DUCTILE FRACTURE MODELLING AND J-Q FRACTURE MECHANICS: A CONSTRAINT BASED FRACTURE ASSESSMENT APPROACH LARROSA, N.O. - AINSWORTH, R.A.
12:30 12:50 NUMERICAL INVESTIGATION ON FATIGUE GROWTH OF MULTI SURFACE-FLAWS IN SHAFT UNDER ROTARY BENDING BY S-FEM SUGA, K. - KIKUCHI, M. - WADA, Y. - KAWAI, H.
12:50 13:10 NUMERICAL MODELING OF DUCTILE DAMAGE MECHANICS COUPLED WITH AN UNCONVENTIONAL PLASTICITY MODEL FINCATO, R. - TSUTSUMI, S.
Room 006 10:20 10:40 Crack III
Chairman: Marco Antonio Meggiolaro
EFFECT OF STATIC-CRACK OPENING STRESS ON SHEAR-MODE FATIGUE CRACK THRESHOLD OF BEARING STEELS ENDO, M. - WADA, K. - MATSUNAGA, H. - OKAZAKI, S.
10:40 11:00 COMBINED SIMULATION OF FATIGUE CRACK NUCLEATION AND PROPAGATION BASED ON A DAMAGE INDICATOR SPRINGER, M. - KARUNAMURTHY, B. - NELHIEBEL, M. - PETTERMANN, H.
11:00 11:20 FATIGUE CRACK GROWTH OF ALUMINIUM ALLOY 7075-T651 UNDER NON-PROPORTIONAL MIXED MODE I AND II LOADS YU, X. - LI, L. - PROUST, G.
11:20 11:40 CRACK INITIATION BEHAVIOR OF NOTCHED SPECIMENS UNDER SERVICE TYPE LOADING AT HIGH TEMPERATURE CUI, L. - WANG, P.
11:40 12:10 COFFEE BREAK
12:10 12:30 Fatigue criteria III
Chairman: Carpóforo Vallellano
A CRITICAL ANALYSIS OF THE MISES STRESS CRITERION USED IN FREQUENCY DOMAIN FATIGUE LIFE PREDICTION NIESŁONY, A.
12:30 12:50 INTERACTION OF SHEAR AND NORMAL STRESSES IN MULTIAXIAL FATIGUE DAMAGE ANALYSIS GATES, R. - FATEMI, A.
12:50 13:10 A MULTIAXIAL INCREMENTAL FATIGUE FORMULATION FOR THE CRITICAL-PLANE APPROACH MEGGIOLARO, M.A. - CASTRO, J.T.P. - WU, H.
Auditorium 13:10 13:40 Concluding Remarks  
  13:40 15:00 LUNCH